mooc-course.com is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

The Arduino Platform and C Programming (Coursera)

The Arduino Platform and C Programming (Coursera)

Key Facts

Hover in Table Body & click related link to explore more courses
Provider
School
Language
Level
Coursera
University of California Irvine
English
Intermediate

By enrolling in this online course you will spend approx. 13 hours to learn key concept of Arduino.

Course Overview

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment).

You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums.

Upon completing this course, you will be able to:

  1. Outline the composition of the Arduino development board
  2. Describe what it means to program the board’s firmware
  3. Read board schematics
  4. Install Arduino IDE
  5. Describe what “shields” are and how they are used
  6. Specify the role of libraries in the use of shields
  7. Compile and run a program
  8. Name C Variables and Types
  9. Name common C operators
  10. Use conditionals and loops
  11. Explain functions, their definition and invocation
  12. Explain the implications of global variables
  13. Undertake the Arduino build process
  14. Describe the role of the tools behind the IDE
  15. Describe how to invoke functions in classes
  16. Explain the structure of an Arduino sketch
  17. Access the pins of the Arduino
  18. Differentiate between digital and analog pin
  19. Debug embedded software
  20. Explain the importance of controllability and observability in the debugging process
  21. Describe common debugging architectures for embedded systems
  22. Explain how the UART Serial communication protocol works 23. Describe how the Arduino Serial library performs serial communication

Course Syllabus

Arduino Environment

This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.

C Programming

This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.

Arduino Programs

This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.

Module 4

This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.

Meet your Instructors

Ian Harris

Ian G. Harris is currently Vice Chair of Undergraduate Education in the Computer Science Department at the University of California, Irvine. He received his BS degree in Computer Science from Massachusetts Institute of Technology in 1990. He received his MS and PhD degrees in Computer Science from the University of California, San Diego in 1992 and 1997 respectively. He was a member of the faculty in the Electrical and Computer Engineering Department at the University of Massachusetts Amherst from 1997 until June 2003. Professor Harris serves on the program committees of several leading conferences in hardware design verification and security including IEEE/ACM Design Automation Conference, IEEE International Conference on Computer-Aided Design, and IEEE Hardware Oriented Security and Trust (HOST). Professor Harris serves on the program committees of several leading conferences in hardware design verification and security including IEEE/ACM Design Automation Conference, IEEE International Conference on Computer-Aided Design, and IEEE Hardware Oriented Security and Trust (HOST).

* We try to provide you as many free online courses from multiple providers and universities but in some cases you may have pay nominal fee to get assignments and/or to claim verified Certificate or Degree from respective provider.

Similar Arduino MOOC Courses

The Arduino Platform and C Programming (Coursera) Course Review

Already taken The Arduino Platform and C Programming (Coursera) course? Share your review on MOOC course content, Certification, Assignment, Exam to help others.

{{ reviewsLength }} Review

{{ reviewsLength }} Reviews

{{ options.labels.newReviewButton }}
{{ canReviewMessage }}

The Arduino Platform and C Programming (Coursera)

0.0/5

Share this Course

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email